Window Motor

As the garage was about 10 kilometers away from my home, I took smaller parts home to be fixed and cleaned. One of these was the electric window motor which looked like this:

One of the connectors had broken and it had been "fixed" by screwing a long screw next to it. The wire was then wrapped around the screw. Very professional looking... I disassembled the motor, cleaned it and added fresh grease. The connector was fixed by soldering short wires to it. The motor still wouldn't turn but luckily this was only because the adjusting screw on top of the axle was too tight. After loosening it, the motor worked fine! :)